|
1.
|
What is an AC connector Pin Out?
Pin A is Line; B is GND; C is Neutral;
|
|
|
|
2.
|
What are the operational AC Voltage Ranges of Mitec’s BUC and SSPA?
- 90 to 130VAC or 190 to 260VAC for:
- C-Band RF Power < 100W and;
- Ku-Band RF Power < 80W
- 190 to 260VAC for:
- C-band RF Power of > 100 W, and;
- Ku-Band RF Power of > 80W.
|
|
|
|
3.
|
What is 10MHz level required?
BUC requires 10 MHz level of 0dBm+/-5dB.
|
|
|
|
4.
|
What is the DC voltage range for the BUC and the BUC current?
+15 to +24VDC; operational current 1 to 1.5A; muted <0.2A.
|
|
|
|
5.
|
How do I connect my laptop or PC to the RS-485 Interface?
An RS-485 to RS-232 converter or RS-485 to USB converter is required. Mitec recommends the following models:
- RS485 to RS232 converter: B&B ELECTRONICS 4850T9L, which must be used with an AC power pack (B&B ELECTRONICS 485PS2)
- RS485 to USB converter: B&B ELECTRONICS USOPTL4
The interface protocol is included in the User Manual.
GUI software is also available from the Mitec ftp site. You can access Mitec’s ftp site at:
ftp://ftp.mitectelecom.com/
choose: File -> Login As...
username: mitecftp
password: ftp2004
|
|
|
|
6.
|
What is a Local Oscillator (LO) frequency of the BUC?
LO frequency is indicated in the BR document and/or the User Manual.
LO Frequency:
- Standard C-Band is 4.9GHz;
- Standard Ku-Band is 13.05GHz;
- Standard bands BUCs are non-inverting
|
|
|
|
7.
|
What is the function of a Bias Tee?
To provide +24 VDC and 10 MHz reference to the BUC.
|
|
|
Print this page